A Merry Welcome!

So here is my first Christmas project for the year!!

I saw something similar at our church's Advent celebration & pretty much straight up copied it. I couldn't help it. It was love at first sight! I plan to make a 2nd stack to go on the other side of my door, so I'm not completely done, but I thought I would share it with you anyway.

I started with 3 different sized boxes...9, 12 & 14 inch cubes.

I used an ice pick to punch holes in each of them so that I could run a rebar through them. (It's easier to do the holes first, before getting them all wrapped & pretty.) For the smaller boxes, I slightly off-centered my holes, so that the boxes would tilt on each other.

Then I wrapped them and made bows for each.

Tip: Keep your wrapping paper pattern running the same direction.

Tip #2: Before you poke holes through the paper, put a little tape on it. It will help the paper from ripping.

I also made sure my seams were right down the middle of the boxes so that the ribbon would cover them up. And I used double-sided tape to hold the ribbon and bows in place. I'd love to take credit for these tidbits, but again, I straight up copied this idea!!

What do you think?? I can't wait to make the other stack!